How to install the drill chuck onto regular SDS rotary hammer？

 

 

Installing a drill chuck onto a regular SDS rotary hammer involves a few steps. Please note that the specific instructions may vary based on the brand and model of your rotary hammer. Here is a general guide:

 

 

 

**Materials Needed:**

- Drill chuck with SDS adapter

- Chuck key (if required)

                                   

 

 

**Steps:**

 

 

1. **Check the Compatibility:**

   Ensure that the drill chuck you have is compatible with your SDS rotary hammer. Some chucks come with an SDS adapter, while others may require a separate adapter.

 

 

 

 

2.1 **Install the Drill Chuck Step ①:**

    First, you have unscrew the Philip's head screw off the shank. And thread the SDS shank into the 3 jaw chuck.

 

 

 

 

2.2 **Install the Drill Chuck Step ②:**

    Then, insert the screw onto this SDS shank from the other hand of chuck. And tighten it with screwdriver.

 

 

 

 

3. **Place the Chuck on the Adapter:**

   Slide the drill chuck onto the SDS adapter. Align the slots or grooves on the chuck with the protrusions on the adapter.

 

 

 

 

 

4. **Secure the Chuck:**

   If your drill chuck has a locking mechanism, follow the manufacturer's instructions to secure it in place. Some chucks have a locking sleeve that needs to be pulled back while inserting the chuck.

 

 

 

5. **Tighten with Chuck Key (if applicable):**

   If your drill chuck requires a chuck key, insert the appropriate drill bit into the chuck. Use the chuck key to tighten the jaws securely around the bit.

 

 

 

 

 

6. **Test the Installation:**

   Rotate the chuck by hand to ensure it is securely attached. If your rotary hammer has a hammer drill function, test it to ensure proper functionality.

 

 

 

 

 

 

Always refer to the user manual provided by the manufacturer for specific instructions and safety guidelines. If you're unsure about the installation process, it's advisable to seek assistance from a professional or contact the manufacturer for guidance. Incorrect installation may result in damage to the tool or compromise safety during operation.

 

Rotary Hammer Different Modes Using Instruction